Taroma Vape – Lite Plus – Ball Vape – Device DIY Kit – 14 + 18mm Bowl Short

Taroma Vape – Lite Plus – Ball Vape – Device DIY Kit

Set with 2 Bowls – Short in 14mm + 18mm

The TaromEin Lite Plus is designed to push the boundaries of a 20mm coil while maintaining the unique characteristics of Taroma Lite. In the balance between case and gemstone mass, the Taroma Lite Plus is strongly based on the gemstone mass.

Features of GR2 Titanium – Taroma Lite Plus:

1. Extended gemstone Cham with around 95% of the gemstones in the “Heater Coil Zone”. The 5%-6% distance on the canopy surface ensures better double-decker performance, so concentrates do not evaporate immediately, but fall into the “heating coil zone”.

2. Gemstone chamber normal capacity is about 300-310pcs of 3mm rubies. A few threads on the cap can be sacrificed to further increase the capacity of the gemstone chamber. This is not required for most users.

3. Additional airflow to compensate for the increase in depth. Air holes are now also beveled to allow better airflow and better use of the concentrate.

4. Start using at no more than 510F and slowly increase/decrease your desired temperatures.

5. Reduced diameter to balance the deeper gemstone chamber. Taroma Lite Plus is now only 23g.

6. The coil must be stretched a little longer than the length of the gemstone chamber and then pushed back (like a spring) with the cap to ensure a good and firm fit.

Do not use incompatible coils on Taroma Lite Plus. For reference, our coil pin assignment is:

Coil (5-pin XLR connector) PIN 1 = TC-, PIN 2 = TC+, PIN 3 = GND, PIN 4 = AC-, PIN 5 = AC+

Note: If you leave the heater to rest for a long time, the Taroma Lite Plus Stand will feel like it’s touching a bowl of hot soup. However, it is safe to touch for a few seconds.
The applications for Taroma Lite Plus are endless. If you need a small, ultra-pure convection heater at precise temperatures, you benefit from the Taroma Lite Plus. Due to its standard sizes for laboratory glassware, the Taroma Lite Plus is very easy to adapt to your needs. There is really no fixed way to use the Taroma Lite Plus.

Each Taroma Lite Plus uses around 310 pieces of 3mm rubies. There are no rubies/gems included in this kit. If necessary, add these to your order (t if bags are needed)

Each DIY kit comes with:

1 x Taroma Lite Plus titanium case

1 x Taroma Lite Plus Adapter Set with 2 Bowls – Short in 14mm + 18mm

1 x 20mm Test Mounted Taroma Lite Plus Coil

1 x Taroma Lite Plus PID controller with plug (US or EU only)

1 x Taroma Lite Plus Coil Handle – Walnut Rodwood Green/Blue (Please leave a comment during checkout or random color will be selected)

1 x Taroma Lite Plus Suet Jade Porcelain Stand

1 x Pack 17mm Stainless Steel Sieve

1 x Free Stainless Steel Shovel + Stirring Tool

No rubies in this kit. If needed, please add HERE (two pockets required)